98-242r1 Date: 13-Nov-1998 To: J3 From: JOR/Stan Whitlock Subj: Edits from 98-204 and 98-212 All references are to 98-007R3. 1) [166:3-4] change "5.6 of ISO/IEC 1559:1989" to "the IEEE standard" note to editor: please find and change all references to 754 and ISO/IEC 1559 or 559 to "the IEEE standard" except the bibliographical reference in section 1.8 2) [7:5] change "1559:" to "559:" 3) [352:5] change "section 5.6 ... :1989" to "the IEEE standard" 4) [209:9] change "input" to "output" 5) [72:19] change "Forran" to "Fortran" 5+) [72:21] change "responsability" to "responsibility" 6) [209:39] change "appearance" to "representation" 7) [209:43] change "files" to "file" 8) [210:1] change "descriptor" to "descriptors" 9) [211:44] after "blanks" insert "and any number of ends of records" 10) [307:27] change "R" to "NAME" 11) [165:34-35] change "may ... 3/32" to "has no exact representation on most processors" 12) [162:6] change "or PAD=" to "PAD=, DECIMAL=, or ROUND=" 13) [160:33+] insert "J3 note: F2K needs an intrinsic routine that returns the external unit number of the unit used by * input and * output 14) JOR doesn't recommend ADV= on internal I/O since the "next" I/O won't start where the "previous" I/O left off 15) [165:38] change "he" to "the" 16) [169:38] after "input" insert "(9.4.3)" 17) [171:17] before "of" insert "with a value" 18) [173:5] insert at the end of the line "that is not processed by a user-defined derived-type I/O procedure" 19) [168:38+] insert "J3 note: should ROUND= be added to for list-directed I/O on unit *?" 20) [182:44] after "PAD=" insert ", ROUND=, DECIMAL=," 21) [206:22] put one blank between "'Link" and "List'" and between "DTLink" and "List" 22) [210:27+] insert "J3 note: should F2K allow ; as a value separator and complex constant separator even when DECIMAL='POINT' in list-directed and namelist input?" 23) [216:33] after "blanks" insert "and any number of ends of records"