To: J3 J3/26-176r1 From: Malcolm Cohen & Lorri Menard Subject: Edits to remove some of the US19 intrinsic functions Date: 2026-June-18 Reference: 26-007r1, 26-178r1 Introduction: Original paper 26-176 suggested that most of the new intrinsics inserted by US19 are not actually useful. Discussion with the J3 members in plenary led to a decision to pull 7 of these intrinsics from the standard under development; these intrinsics can, of course, be added in a future release if there are significant user requirements. It was also decided by the J3 members in plenary that there be a table showing computational formulas for IEEE operations that do not have corresponding intrinsic procedure equivalents in Appendix C; that is in a separate paper. Also, paper 26-178r1 contained edits to some of these intrinsics; that paper will be modified to apply to only any remaining affected intrinsics. Edits: [xv] Introduction In the "Intrinsic procedures" bullet, modify the sentence: "The new intrinsic functions COMPOUND, EXPM1, EXP10M1, EXP2M1, LOGP1, LOG10P1, LOG2, LOG2P1, ROOTN, and RSQRT were added were added; these are similar to recommended operations in ISO/IEC/IEEE 60559:2020 ("IEEE-754")." to remove references to COMPOUND, EXPM1, EXP10M1, EXP2M1, LOGP1, LOG10P1, LOG2P1, making the sentence now read: "The new intrinsic functions LOG2, ROOTN, and RSQRT were added; these are similar to recommended operations in ISO/IEC/IEEE 60559:2020 ("IEEE-754")." Table 17.1 - Standard generic intrinsic procedure summary [429] Remove entries for COMPOUND, EXPM1, EXP10M1, and EXP2M1. [430] Remove entries for LOG10P1, LOG2P1, and LOGP1. 19.9 Specifications of the standard intrinsic procedures [465:1] Remove entirety of 17.9.65 COMPOUND (X, N) [477:4] Remove entirety of 17.9.91 EXPM1 (X) [477:14] Remove entirety of 17.9.92 EXP10M1 (X) [477:24] Remove entirety of 17.9.93 EXP2M1 (X) [500:1] Remove entirety of 17.9.140 LOG10P1 (X) [501:1] Remove entirety of 17.9.142 LOG2P1 (X) [501:22] Remove entirety of 17.9.144 LOGP1 (X)